Honda Develops New Technology to Weld Together Steel and Aluminum.

Achieves World's First Application to the Frame of a Mass-production Vehicle: The 2013 Accord

Hybrid-Structured Front Subframe Achieves Both Weight Reduction and Increased Rigidity

Honda Motor Co., Ltd. has newly developed a technology for the continuous welding of the dissimilar metals of steel and aluminum and applied it for the first time in the world to the subframe of a mass-production vehicle, a key component of a vehicle body frame. Honda will adopt this technology first to the North American version of the all-new 2013 Accord, which will go on sale in the United States on September 19, 2012, and will expand application sequentially to other models.

Striving to reduce vehicle weight in order to increase fuel economy, Honda focused on Friction Stir Welding (FSW) and developed a new technology for the continuous welding of steel and aluminum. This technology generates a new and stable metallic bonding between steel and aluminum by moving a rotating tool on the top of the aluminum which is lapped over the steel with high pressure. As a result, the welding strength becomes equal to or beyond conventional Metal Inert Gas (MIG) welding.

This new technology contributes to an improvement in fuel economy by reducing body weight by 25 percent compared to a conventional steel subframe. In addition, electricity consumption during the welding process is reduced by approximately 50 percent. It also enabled a change in the structure of the subframe and the mounting point of suspension, which increased the rigidity of the mounting point by 20% and also contributed to the vehicle’s dynamic performance.

Furthermore, Honda established a new method to apply this technology to mass-production vehicles. Conventionally, FSW required use of large equipment, but Honda developed a FSW continuous welding system applied to a highly versatile industrial robot. This system also can be used for aluminum-to-aluminum welding and thus, the welding system with the same specifications can be used for production of a full-aluminum subframe.

Honda also developed a non-destructive inspection system*2 using a highly-sensitive infrared camera and laser beam, which enables an in-line inspection of the bonding location for every unit. (9/6/2012)

Links.

Honda Worldwide/ Automobiles

Related.

--- Honda Fit EV Begins Leasing July 20 in California and Oregon for $389/Month.

--- Honda Fit EV Rated by the EPA at 118 MPGe; Tops All Other EV Offerings in Efficiency Ratings.

Disclaimer, Forward-Looking or Safe Harbor Statement on original press release: No